Most clears will work. I've used matte clear from orielly auto parts and high-end urethane automotive type clears. Trick is to start with light coats such that clear wont start to get under the decal and lift it. So 2 or 3 light mist coats and then you can step it up to medium wetness coats. I almost never have an issue, especially with the decal you are doing. I had some lifting on a coke machine recently but it was minor and the sticker was cut into very thin strips.
(i'm assuming you are clear-coating the panel after applying the decal)
Last edited by Paul Bell; Sat May 28 2022 04:51 PM.
