Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion I'd plates placement on visible

I bought new skins for my Wayne 615. I bought a new id.tag. a contains lead tag. And a Wayne sticker/decal. Now I need to see just where they were placed to look correct
Thank you

Centered just below the locking tap on the skins. If you have repop skins they probably do not have this tab. Richard

Yes my repo skins has the tab for the Handel

If I was answering that question and that is your pump. I would butt my tape under the lower cast iron bowl and read measurements at the top of each one.

????? Ok lost me

Maybe this will help.

http://www.oldgas.com/forum/ubbthreads.php?ubb=showflat&Number=681678

Refer to your facebook post.

All three are located above the pump handle and below the lock tab. Similar to the yellow pump above.

you can see the rivet holes in the photos below. top ID tag, middle UL tag, bottom Stuffing Box tag.

That's awsome. And so very helpful. Is that sticker on the side. Or metal?
Was ment for the one in the link

First off thank you guys that are replying. You are a huge help
I found a 12 decal to match my globe. Before I order it...does the pump (visible) have one? Or Is there one on each skin?