Hi all, I am looking for a Wayne 605 parts pump. Preferably within a 100 mile radius of my home.
Parts I DON'T need,
lower covers
ad glass panels
stainless doors

Let me know what YOU have!

Thanks, John

Still looking for this pump. Thanks, John

Still in the hunt. Thanks, John

Still looking. Anyone bringing one to CTO?

Just a quick update. The pump I am looking for is a 600, NOT A 605. Just discovered. Thanks!!

Hi All, Still looking. Thanks!

I have found the majority of the parts I have needed to complete the "rustoration" of this pump. Thanks Tom Buckles!
However i still need a piece of the internal piping.
The pipe in question runs from the meter to a common manifold shared by the hose outlet and the sight glass. Each end of the pipe has a three sided flange with three attaching bolts. This pipe is unique to the Wayne 600 model.
I have attached the manufacturers diagram with the pipe highlighted.
Let me know if you have one laying around. I know many collectors gut the internals of the pump so I guess there has to be one some where.
Thanks so much for any assistance.
Greatly appreciated.

Still looking for this pipe. Thanks!

Tom should have that part also?

I purchased a 600 parts pump from Tom. The one I bought was the best and most complete, and possibly the only 600 he had. That pipe had been cut and only one half of the pipe was left. The 600, I believe is a rare derivation of this series of Wayne pumps. Thank you for the help just the same!
I will continue the search.