Here is one i built. I took some 3" x 1/8" HRF (hot roll flat steel) and wrapped it around a barrel and welded some 1" angles to keep the side straight. Welded a few angles to bolt it to my concrete drive. Cut a hole in my driveway about 10" square and dug down about a foot... went out in the yard and dug a hole and heated up a piece of 1" gray PVC and made the end a wedge. Then drove it under my driveway about 3' or 4' and cut the ends off and put an elbow on it to bring it up. made a stand for electric box and ran wiring for the light. Filled with concrete and done.



Last edited by Jarvis; Wed Feb 23 2011 12:29 PM. Reason: make link work
Looking for anything from Hoosier Pete, Platolene 500 and Red Bird.