I have Canadian made Bowser Post Sentry Model C-18? ( that is what the serial plate shows). I am missing some parts up under the top cap. I have attached a picture of the pump, the top cap, and the casting that sits on the cylinder. I know I am missing the two side lights, the globe light, but more importantly also missing is whatever top plate was used to seal the top of the cylinder.
I have been unable to locate a parts diagram or pictures to identify what exactly I am missing. Another Old gasser sent me a picture of his pump together that showed me the general structure of the two outside lights I am missing but not what the socket type, conduit structure nor what the top plate looks like. With Canadian pumps, they were often made under contract with the U.S. manufacturers and accordingly quite often the parts are close to, if not identical to, the U.S. Pumps. I am hoping there is a US old gasser that has their Post Sentry Bowser in pieces such that they can send me pictures of their top assembly to see if a U.S. part will solve my problem.
Thanks for any help you can provide.
