|
#685453
Tue Apr 25 2017 12:13 PM
|
Joined: Aug 2015
Posts: 212 Likes: 8
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Aug 2015
Posts: 212 Likes: 8 |
Does anyone have a lower side skin for a narrow body Wayne 60 in decent shape?? I don't think anyone is repoping them?
Thanks!
Eric von Grimmenstein Indianapolis, IN evong@vanausdall.com Cell 317 502-5669
|
|
|
|
Joined: Jan 2007
Posts: 640
Petro Enthusiast
|
Petro Enthusiast
Joined: Jan 2007
Posts: 640 |
One of the best chances you have to find that panel is right there in Indianapolis! Tom Buckles on this site. Ed.
|
|
|
|
Joined: Aug 2015
Posts: 212 Likes: 8
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Aug 2015
Posts: 212 Likes: 8 |
Was my first call before I posted and he did not have one. Need it for a Wayne 66. should be the same As a narrow body 60.
Last edited by Restoration-1; Tue Apr 25 2017 04:05 PM.
|
|
|
|
Joined: Aug 2004
Posts: 1,682 Likes: 17
Veteran Member
|
Veteran Member
Joined: Aug 2004
Posts: 1,682 Likes: 17 |
Narrow or wide body, doesn't matter for side hips. They're reproduced in metal for about $200 if you can't find an original.
|
|
|
|
Joined: Aug 2015
Posts: 212 Likes: 8
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Aug 2015
Posts: 212 Likes: 8 |
Who are you saying is reproducing narrow body, I have only see the wide body?
Thanks
Last edited by Restoration-1; Wed Apr 26 2017 03:37 AM.
|
|
|
|
Joined: Aug 2004
Posts: 1,682 Likes: 17
Veteran Member
|
Veteran Member
Joined: Aug 2004
Posts: 1,682 Likes: 17 |
Side skins are interchangeable between wide and narrow body pumps.
|
|
|
|
Joined: Aug 2015
Posts: 212 Likes: 8
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Aug 2015
Posts: 212 Likes: 8 |
Wide body's have the extra hip and much wider at the bottom. Narrow body, is narrow all the way down, you might look in the book to see they are completely different and not interchangeable.
Still looking!
Thanks,
Eric
Last edited by Restoration-1; Wed Apr 26 2017 04:37 AM.
|
|
|
|
Joined: Jun 2011
Posts: 359 Likes: 3
Petro Enthusiast
|
Petro Enthusiast
Joined: Jun 2011
Posts: 359 Likes: 3 |
Eric ask whoever is making them not to stamp out the cut out for the hip section. This has to be at least a two hit die. If they don't cut out the hip section, you should have a narrow body?
Worth to ask the question in my mind
|
|
|
|
Joined: Aug 2015
Posts: 212 Likes: 8
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Aug 2015
Posts: 212 Likes: 8 |
Great point, if I can't find a decent original I will pursue.
Thank you!
|
|
|
|
Joined: Nov 2002
Posts: 4,961 Likes: 17
Moderator
|
Moderator
Joined: Nov 2002
Posts: 4,961 Likes: 17 |
Wide body's have the extra hip and much wider at the bottom. Narrow body, is narrow all the way down, you might look in the book to see they are completely different and not interchangeable.
Still looking!
Thanks,
Eric Narrow bodied pumps take the same hip as a wide body. The only pumps that take the sides with out the extra bump out are the 60-a and the 66. Finding a hip for the 60-a or 66 is going to be real tough. I have been looking for a pair for my 66 for quite some time.
FREEDOM oil items wanted.
|
|
|
|
Joined: Aug 2015
Posts: 212 Likes: 8
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Aug 2015
Posts: 212 Likes: 8 |
My mistake, then you are correct I need a side that goes on a 60-a or a 66. The idea of finding who is reproducing the sides and see if they can do one without the extra hip might be the best bet.
|
|
|
|
Joined: Dec 2001
Posts: 1,537
Veteran Member
|
Veteran Member
Joined: Dec 2001
Posts: 1,537 |
GPH makes them with the hip I would give them a call to see if they could make one. Wayne 60 with hip If your side panel is bad at the bottom why couldn't you get a panel with the hip cut it in half turn it up side down and weld the two together? Just a thought.
Last edited by Don Beaver; Wed Apr 26 2017 07:49 AM.
|
|
|
|
|
|