Oldgas.com Home  
Home | Help | Events | Auctions | Parts | Contact
Previous Thread
Next Thread
Print Thread
Needs Eco air meter Parts #704448
Mon Feb 12 2018 07:02 PM
Mon Feb 12 2018 07:02 PM
Joined: Sep 2017
Posts: 21
Quebec, Canada
M
mustanggtcs Offline OP
Member
mustanggtcs  Offline OP
Member
M
Joined: Sep 2017
Posts: 21
Quebec, Canada
Hello
Short story, I bought an eco air meter without looking inside.
Later, I looked inside and it was missing a lot of parts, My bad !!! Next time I will always look Inside,
I'M looking for used parts.

1-I Need the main spring and ajustable screw and gear. and
2-The hose hook level arm.
3- the parts surrounded by redon the picture.

Thank you

Martin

[Linked Image]

Re: Needs Eco air meter Parts [Re: mustanggtcs] #704449
Mon Feb 12 2018 07:31 PM
Mon Feb 12 2018 07:31 PM
Joined: Sep 2017
Posts: 21
Quebec, Canada
M
mustanggtcs Offline OP
Member
mustanggtcs  Offline OP
Member
M
Joined: Sep 2017
Posts: 21
Quebec, Canada
This is my bad purchase
[Linked Image]

[Linked Image]

Re: Needs Eco air meter Parts [Re: mustanggtcs] #704465
Mon Feb 12 2018 11:06 PM
Mon Feb 12 2018 11:06 PM
Joined: Dec 2002
Posts: 3,093
Cleveland,Ohio U.S.A.
JimT Offline
Veteran Member
JimT  Offline
Veteran Member
Joined: Dec 2002
Posts: 3,093
Cleveland,Ohio U.S.A.
Does your meter have two wheels or threee? As the part your looking for is called a shot lengthener and when it is added ton the 90 series meter it increases their air output capacity to over 99 lbs. If you only have the two wheels there is no point in putting it in unless you ad the third wheel and change the face plate as well.
If you dont have one already, the first thing you should do is get a service manual .

Last edited by JimT; Mon Feb 12 2018 11:07 PM.
Re: Needs Eco air meter Parts [Re: JimT] #704476
Tue Feb 13 2018 07:43 AM
Tue Feb 13 2018 07:43 AM
Joined: Sep 2017
Posts: 21
Quebec, Canada
M
mustanggtcs Offline OP
Member
mustanggtcs  Offline OP
Member
M
Joined: Sep 2017
Posts: 21
Quebec, Canada
Thank you very much Jim, my Air meter has 3 wheels, I have the parts book, but, I do not have the service manual, it's a good idea to buy it.
Here is the face that is also damaged

[Linked Image]

Thank you

And still looking for used parts

Re: Needs Eco air meter Parts [Re: mustanggtcs] #704485
Tue Feb 13 2018 11:08 AM
Tue Feb 13 2018 11:08 AM
Joined: May 2005
Posts: 4,138
Illinois
Cold Pizza Online content
Veteran Member
Cold Pizza  Online Content
Veteran Member
Joined: May 2005
Posts: 4,138
Illinois
Instruction manual is good too.

eco008.jpgeco017.jpgeco021.jpgeco023.jpg

Collecting Vintage Sunoco
Re: Needs Eco air meter Parts [Re: mustanggtcs] #704499
Tue Feb 13 2018 02:01 PM
Tue Feb 13 2018 02:01 PM
Joined: Jan 2012
Posts: 2,937
Western, WI.
Mike M. Offline
Veteran Member
Mike M.  Offline
Veteran Member
Joined: Jan 2012
Posts: 2,937
Western, WI.
Give Jack Sim a Call, I'm sure he has some used parts!

http://petrolianacollectibles.com/pc-1.htm


Thanks
Mike

Always Looking for any Pure Oil and Sunoco Items.
Re: Needs Eco air meter Parts [Re: mustanggtcs] #704674
Thu Feb 15 2018 10:14 PM
Thu Feb 15 2018 10:14 PM
Joined: Nov 2000
Posts: 7,182
St. Louis, MO, USA
J
Jack Sim Offline
Veteran Member
Jack Sim  Offline
Veteran Member
J
Joined: Nov 2000
Posts: 7,182
St. Louis, MO, USA
Cindy and I have been selling ECO parts since 1989. I have also rewrote the service manual. Actually ECO published a number of service manuals. Actually it is not a manual, it is an accumulation of individual problems. As the problems occured, they made a page for it and added it to the so called manual, all in no particular order. I rewrote most of it and I put in the order you to follow the rebuild process from the first thing to the last thing. The reason for that is the original manual was written to repair one particular problem at a time. Today, we are now rebuilding the complete meter and that is the way I wrote out manual.

Our parts can be found at this address: http://petrolianacollectibles.com/eco%2090%20parts.htm
The manual is also found on these pages.

For some time we have been offering a rebuild service, this is explained here: http://petrolianacollectibles.com/eco%2090%20literature.htm

We have also started a restore service. You send us the entire meter, we rebuild the mechanism and completely restore the entire meter. It is returned completely restored, ready to attach to your air supply and to the electric supply. Not much more than a screwdriver, wire crimper and a air supply is all you need, we even use teflon tape on every air connection. We cannot quote a price here on this because every meter is different.

Check out our website or give us a call at 314-427-3943.

Jack & Cindy Sim


Author, Gas Pump Identfication books 1st & 2nd Editions & Air Meter Identification books
We rebuild ECO air meters and sell parts.

Moderated by  Oldgas, Ryan Underthun, Watchdog2 

Click for an eBay Search Form and lots more live petro auction listings

Copyright © 2018 Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.6.1.1
(Release build 20180111)
Page Time: 0.020s Queries: 15 (0.005s) Memory: 1.8575 MB (Peak: 1.9600 MB) Zlib disabled. Server Time: 2018-02-21 13:16:17 UTC