Oldgas.com Home  

Click here for Original Gas Pump Plate auction listings

Home | Help | Events | Auctions | Parts | Pictures | Links | Contact
Previous Thread
Next Thread
Print Thread
Page 1 of 5 1 2 3 4 5
#639699 Sun Dec 06 2015 02:48 PM
Joined: Jan 2011
Posts: 337
Likes: 4
S
Stu K. Offline OP
Petro Enthusiast
OP Offline
Petro Enthusiast
S
Joined: Jan 2011
Posts: 337
Likes: 4
It started out collecting signs. That's it, just signs............Then came a visible........... Then a sign pole..........Then last spring I found a riveted tank a couple of hours away. At first, it was going to be "yard art". Somehow it morphed into a restoration. My wife got on board also. Information on horse drawn tank wagons is nill on the internet, so about all I had to go on was pictures. This is the story of the restoration process. To my knowledge, no one has posted about this before. We have learned quite a bit about horse drawn vehicles. The bad part of this is that when this is finished, we will primarily be going to parades, threshing bees, etc. But we will be ambassadors for petroliana. Please bear with me on this as my picture posting/resizing abilities are being tested. To some that may be easy, I have hours invested trying to do this and also a little help from Jim. So to start, the first picture is the tank when it came home. The running gear is totally worthless and not correct. The second picture is of a farm wagon that I went to Ohio for and hauled home on a flatbed. We took the box off the running gear and put it on another less desireable gear and put it in the yard. The third picture is of a gantry that had to be built and the first stages of marrying these two together. More to follow.

DSCF0494 (2).JPG DSCF0498 (2).JPG DSCF0567 (2).JPG
Value Questions and Showcase forums

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
Stu K. #639703 Sun Dec 06 2015 03:20 PM
Joined: Jan 2011
Posts: 337
Likes: 4
S
Stu K. Offline OP
Petro Enthusiast
OP Offline
Petro Enthusiast
S
Joined: Jan 2011
Posts: 337
Likes: 4
There has been a lot of thought that has to go into this project. All parts are handmade. A supply of square head nuts and bolts was procured. What is made/installed now cannot be in the way of something else down the line (this is the most important). We took the best designs/ideas (as we see it) and are incorporating them into this project. We do not own horses, nor do we intend on getting any, so we had to buy a UTV to pull it. It is also going to be set up so horses can pull it. This has to be pieced together all the way, and then taken apart to paint, then reassembled. After all this is done, an enclosed trailer will need to be purchased to put the UTV and the tank wagon in for transportation. This has turned from "yard art" into a full blown quest. So far, I have gone well above what I thought it would cost. It's not about the money, but about doing a project that is pretty rare. There have been some snafoos/happenings along the way which I'll share and you may get a chuckle. More pics. Making the frame.

DSCF0600 (2).JPG DSCF0603 (2).JPG
Stu K. #639704 Sun Dec 06 2015 03:29 PM
Joined: Jan 2011
Posts: 337
Likes: 4
S
Stu K. Offline OP
Petro Enthusiast
OP Offline
Petro Enthusiast
S
Joined: Jan 2011
Posts: 337
Likes: 4
Making sadles for the tank. Proper spacing for tank bungs, rear cabinet, and fitment for length on the running gear taken into consideration.

DSCF0609 (2).JPG DSCF0611 (2).JPG DSCF0614 (2).JPG
Stu K. #639708 Sun Dec 06 2015 03:42 PM
Joined: Oct 2007
Posts: 12,282
Likes: 12
Veteran Member
Offline
Veteran Member
Joined: Oct 2007
Posts: 12,282
Likes: 12
Wow! Tremendous undertaking! Thanks for sharing the process with us!


Everything Cities Service
Specializing in old Gas Pumps
kwfrith@gondtc.com
Cell#-701-739-6133
Stu K. #639710 Sun Dec 06 2015 03:48 PM
Joined: Jan 2011
Posts: 337
Likes: 4
S
Stu K. Offline OP
Petro Enthusiast
OP Offline
Petro Enthusiast
S
Joined: Jan 2011
Posts: 337
Likes: 4
First picture, last post, handmade hardware to attach purchased springs to front bolster. Next we have straps made to hold tank to frame. A quick note on the frame, a VERY minimum of welds were added in the interest of safety. A supply of oak for the cabinet, seat and side steps. The cabinet being assembled on the wild frame.

DSCF0620 (2).JPG DSCF0621 (2).JPG DSCF0623 (2).JPG
Stu K. #639713 Sun Dec 06 2015 03:57 PM
Joined: Jan 2013
Posts: 2,004
Likes: 58
Veteran Member
Offline
Veteran Member
Joined: Jan 2013
Posts: 2,004
Likes: 58
Nice to have the space, tools and TALENT to do that. Looks good so far and looking forward to more posts of your progress and finished product.

Stu K. #639715 Sun Dec 06 2015 03:58 PM
Joined: Jan 2011
Posts: 337
Likes: 4
S
Stu K. Offline OP
Petro Enthusiast
OP Offline
Petro Enthusiast
S
Joined: Jan 2011
Posts: 337
Likes: 4
The box with the doors in the background. and the front step and brake hardware.

DSCF0626 (2).JPG DSCF0630 (2).JPG
Stu K. #639716 Sun Dec 06 2015 04:10 PM
Joined: Jan 2011
Posts: 337
Likes: 4
S
Stu K. Offline OP
Petro Enthusiast
OP Offline
Petro Enthusiast
S
Joined: Jan 2011
Posts: 337
Likes: 4
Some of the cabinet hardware installed. Also, I had a local welding/fabrication shop roll and bend for drip lip, a top for the cabinet.

DSCF0631 (2).JPG DSCF0633 (2).JPG
Stu K. #639717 Sun Dec 06 2015 04:12 PM
Joined: Nov 2012
Posts: 1,165
Likes: 44
B
Veteran Member
Offline
Veteran Member
B
Joined: Nov 2012
Posts: 1,165
Likes: 44
WOW what an undertaking ! Great Job that not many would tackle. This will be a generational piece for your family to enjoy for many years . Thanks for sharing .


Wanted TEXACO related items & SUNOCO related items .Signs -Globes et'c. Oil Cans - Grease cans .
buzzy56 #639718 Sun Dec 06 2015 04:20 PM
Joined: Jan 2011
Posts: 337
Likes: 4
S
Stu K. Offline OP
Petro Enthusiast
OP Offline
Petro Enthusiast
S
Joined: Jan 2011
Posts: 337
Likes: 4
A picture of the work area, working on the seat. And a picture of the seat.

DSCF0634 (2).JPG DSCF0635 (2).JPG
Stu K. #639720 Sun Dec 06 2015 04:36 PM
Joined: Jan 2011
Posts: 337
Likes: 4
S
Stu K. Offline OP
Petro Enthusiast
OP Offline
Petro Enthusiast
S
Joined: Jan 2011
Posts: 337
Likes: 4
The seat initially installed. 4 seat rods hand forged and threaded, each specifically made for it's position. Have to make minor tweaking on a couple of them. These are labeled so that when they are blasted and painted, they will be in the same position. All other items will be labeled so when they are blasted/cleaned and painted, they will go to the proper position. Custom made hardware on the seat for the rods to go through. Also making extra hardware for the seat sides because a grab handle for getting onto the wagon will be added later. Also, a buggy top is being added. My father in law discussing the project.

DSCF0690 (2).JPG DSCF0535 (2).JPG
Stu K. #639721 Sun Dec 06 2015 04:38 PM
Joined: Sep 2007
Posts: 19,349
Likes: 983
Veteran Member
Offline
Veteran Member
Joined: Sep 2007
Posts: 19,349
Likes: 983
that is going too be killer when completed.. ... cool


RANDY
Stu K. #639724 Sun Dec 06 2015 05:07 PM
Joined: Aug 2010
Posts: 218
Likes: 1
B
Petro Enthusiast
Offline
Petro Enthusiast
B
Joined: Aug 2010
Posts: 218
Likes: 1
What an awesome project Thanks for including us in on the fun!!!!

Stu K. #639725 Sun Dec 06 2015 05:15 PM
Joined: Oct 2011
Posts: 549
Likes: 1
Petro Enthusiast
Offline
Petro Enthusiast
Joined: Oct 2011
Posts: 549
Likes: 1
Nice work. Looking forward to seeing that done.

Boxcar #639727 Sun Dec 06 2015 05:21 PM
Joined: Jan 2011
Posts: 337
Likes: 4
S
Stu K. Offline OP
Petro Enthusiast
OP Offline
Petro Enthusiast
S
Joined: Jan 2011
Posts: 337
Likes: 4
Squirrel,















Squirrel, My son and I giving each other military haircuts (there may be more squirrels). The beginning of the falling bow top. More to follow.

DSCF0659 (3).JPG DSCF0693 (2).JPG
Page 1 of 5 1 2 3 4 5

Moderated by  Oldgas, Ryan Underthun 

Link Copied to Clipboard

Click here for Gas Pump auction listings

Copyright © 2023 Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.7.5