Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums Want to Buy Petroliana Gilbarco 900 Series Doors

As title says, looking for 1 or 2 doors. let me know what ya got.

The GB 900 series pumps used several different door latch mechanisms. Also there are two different window opening width's. A picture of your pump would help. I may have what you need.
Tom.

Ohh really? I was told any 900 series would work.

Well if anyone would know it would be Tom!!

Tom
I'm in the same ballgame.. ive got two (i.d taged) 956 pumps... wait for it here's the fun part:
*one was a complete matched all the same panel 9566/966 version
*the other one is a bit weird, it ends up looking like a 1066 model thanks to:
- no visy bowls present inside the pump , glass bowl position blanked off
- rear door having no spear trim kit/visy hole present
- front door having the spear trim kit/visy hole present but has what looks like a pressed plate installed where a "B Bennett logo " insert should be.
- both doors are matching lower adglass special panels

hope you guys understand what im getting at .. may have to take a pic or two..

cheers
Martin

also there is the simple left or right hinged setup (even though both side were drilled for hinges) and the opposing tumbler hole for the lock. the back support frame is also a left and right setup.

As a whole, yes any 900 series door will "work". BUT, the 992/994/996 uses a different width window opening than the 904 or 906 V-trim doors.

Most of the 900 series uses the 1/4 turn screw located right below the sight glass to latch the doors shut, BUT some of the 996 models used a push button door latch system located on the side of the pump that remotely opened the doors via a cable system, this style has a special bracket located on the inside of the door towards the top, it then slides into a hole in the top cap that has a small trip latch that is worked by the cable.

Then you have the matter of ad glass vs non ad glass, V-trim, 1 ribbed trim or 2 ribbed trim. This matters on what doors you like because you may not to have to body fill a bunch of extra unused trim holes, good trim with good backing plates can get expensive as most doors will not have good trim still left on them.

The G&B pumps are very frustrating to me when it comes to selling parts, those can be the most confusing of all the brands because of all the minor model variations.

Tom.

I think Tom has some, just waiting to hear back, but in case he does not, I am still looking. Message me! Thanks.

Still looking...