will theses nozzles work with this pump? if not which ones will.

Work..yes,but some would argue the design & full rubber coating is way too modern to look like the original,even for this 4 digit Diesel pump.
Handles were swapped out throughout the years on nearly every single pump as time went by,so finding one with the handle it was delivered with still intact,is not very common.
If you want the handle to more represent the one it was delivered with,I'd aim for an earlier designed handle w/o all that rubber coating....i.e. an OPW #1811.

take a knife and cut the rubber off...just a thought...I've done it before.

Here is one.

eBay 300698057865

i took the diesel stickers off. the lower tins are wrapped in vinyl. peeled it off and only a few small rust holes. other then that they sanded up nice and shiny. i got this one to keep out side next to my car. it was a working pump taken out of service last year. went to a vinyl shop and they want 200.00 to re-wrap in new vinyl with a logo on it.

you think there will do if i sand blast them. eBay #180866568980.

I would buy better ones. These always sell cheap. I'd rather spend the extra money; then spend a few hours on cleaning each nozzle. Your time has to be worth more.

I'd buy one of these
http://www.gaspumpheaven.com/shop/product.php?productid=16950&cat=362&page=1
kind of what you have but, no plastic on them

yes, i saw those last nite Dalin. its only a few bucks more compared to what I'd paid for old ones.

I've got several of those old nozzles laying around. I'll send you one for free but you have to pay the postage.

Is there a way to re-set the pump manually with out electricity?
Or can some one tell me how to do it electrically. I opened the fuse box but i don’t have a wiring diagram. Is it 240 or 120? I just want to re-set it and have it light up.

KW, thanks for the nozzles. this is the one that had the cover on it after i cleaned and polished it. and this one was the worst of the two.