Ha guys. I'm new a this site, so I thought I would try to post a photo of a gate I'm making for my shop. It's about 12' wide and 7' tall. Made the outline from 3/8' x 1" flat bar filled in with 16 ga. sheet metal. Hammerd the face from 16 ga. sheet also. I'm still working on the feathers, and plan on painting it red with 3/8" gold outline. It should turn some heads as they drive by. Drop me a note, and let me know what you thank. So here we go, hope this works. LOL

Welcome to Oldgas low, That's a nice looking gate you got there. Did you free hand the cuts with a plasma? If you did you have a steady hand. LoL!

WOW!! That Is Cool! Lets see a Picture of your Indian!!!

No, I outlined it with flatbar, and then plasma cut sheet metal to go between them. Then I laid dowm a few miles of weld,and a bit of grinding. Probably be a one of a kind. LOL

Do i have to repost, or can i put up a face picture from QUICK REPLY? Darn new guys!!

You can use the "Quick reply".

You don't have to repost for another picture, just hit the grey "Switch to Full Reply Screen" box below the quick reply box.

Thanks for the schooling, wish I had an old indian to show you. Taking donations!!! LOL Here's a close up of the new one.

Ta da Here's a picture of the new one. Darn computers, where's a 10 year old when you need one?

now thats some artwork there!!

That is going to be sweet!!! I can not wait to see it finished

low, don't forget to post a "finished" picture when you get it hanging.

WOW Nice work!!

Thanks for the nice words. GASSERS are the best. I also have a pontiac weathervane that I made. If I can find a picture, I'll Send it up.

That's some fancy hammering. My hammering never comes out like that! Ha Ha
Welcome aboard. Post a picture of that weathervane. I would love to have a nice one but them things can bring some crazy money.
Mike