Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion Newbie with a question on Tokheim pump

Most mail box locks will work from local hardware store.

Larry - I sent you a PM. It looks like I need a copy of your key after all. The TPX 83 fit in the lock but didn't open it. It was actually single sided

I guess the start of the project remains on hold a little longer

Drill the lock out or just break into it. You can get new locks at a hardware store.

TPX is what you need for the older Tokheim pumps

56 DELRAY...I just removed my locks yesterday...Same code... Where did you order a key from ?...Worth a try before a locksmith..Thanks..V

Hi Van,

I got the TPX-83 key (which did not open my pump) from Adamsfogg.com. Their part number is TK1-131381. I suspect as someone else on the board mention it is likely for newer pumps.

Larry (St.Rod) is going to make me a copy of his key, which I will try. I will post to let everyone know if it works for me.

I suppose it is a lot of effort to save the orignal locks, but I wanted to give it a try before I drilled them out and replaced it with "modern" one.


Frank

I'll try there. I heve 3 Tokheims..all with..TPX code...Van.

Van,

I hope I did not confuse you. The TPX-83 key mentioned did not open my old 300 and likely won't open your pumps. The locks on my pump only have TPX on the tumbler as well. I thought it might be worth a try which is why I bought the TPX-83. The TPX-83 likely fits newer pumps.

If you want to try the TPX-83, let me know and I'll send you the one I have.