The clock on the left is an original.
The clock on the right is a copy.
The copy can count, chime and reset, by turning the reset knob clockwise for counting and counter clockwise for resetting.
I can build you a clock,( if you cannot find an original) the faces, trim, hands, reset knob are from Ron Scobie.
He is out of the original reset knobs, so a brass one needs to be used instead. Check w/ Ron first, make sure he has the parts , and if you want one built , just let me know.
You will have to fabricate the base mount for clock and the pipe. I used a 3/4" plumbing "Floor Flange" to mount the pipe to the clock mount on this copy. Then a bell reducer to get it up to 1" pipe. The flange is under the clock mount plate, on the unit on the right.