Oldgas.com Home  

Click here for Air Meter auction listings


Home | Help | Events | Auctions | Parts | Pictures | Links | Contact
Previous Thread
Next Thread
Print Thread
#124513 Mon May 19 2008 07:49 AM
Joined: Apr 2008
Posts: 58
N
Active Member
OP Offline
Active Member
N
Joined: Apr 2008
Posts: 58
I am looking for the large plugs that go into the manifolds of both the M&S 80 and a Bennett 541. I have pictures of both areas. The yellow interior is for the M&S 80 and the Silver manifold is the Bennett 541. Thank you for your help.



Joined: Nov 2006
Posts: 492
Petro Enthusiast
Offline
Petro Enthusiast
Joined: Nov 2006
Posts: 492
If they are the screw in type,I might have one for a Wayne 80. I'll look and see.

Joined: Nov 2006
Posts: 492
Petro Enthusiast
Offline
Petro Enthusiast
Joined: Nov 2006
Posts: 492
I just checked and I think this is what you need. Aprox. 3" in diameter. It has about 3/4" of theards. I'd take $8.00 plus postage to you.

Joined: Apr 2008
Posts: 58
N
Active Member
OP Offline
Active Member
N
Joined: Apr 2008
Posts: 58
Oilmanpat - The inside diameter of the M&S 80 is almost 4 inches and the Bennett is 2 5/8. Both are kind of a fine/medium thread. I spent 2 hours at Lowes yesterday looking at options and all of the plumbing fittings were either a fraction too big or small and they all had a very course thread. I would love to have the correct plug, but would be satisfied with something that fits and looks good. Any ideas? If you do have the correct plug just email me how to pay and I will get it too you right away. Did you mean to show a picture of what you have as I did not see a picture.

Joined: Nov 2006
Posts: 492
Petro Enthusiast
Offline
Petro Enthusiast
Joined: Nov 2006
Posts: 492
Email sent

Joined: Nov 2006
Posts: 492
Petro Enthusiast
Offline
Petro Enthusiast
Joined: Nov 2006
Posts: 492
My Email would not go through. If you send to Pat Thompson 346 So 4th St. Warsaw,il 62379 or paypal me $20.00 i'll sentd it out postal. Any money in excess I will put in the package and send back to you. There are no handling costs. pat

Joined: Apr 2008
Posts: 58
N
Active Member
OP Offline
Active Member
N
Joined: Apr 2008
Posts: 58
Pat,

Thank you for your help. I just sent you $20 via paypal. My address is in the message with the payment.

Jeff

Joined: Nov 2006
Posts: 492
Petro Enthusiast
Offline
Petro Enthusiast
Joined: Nov 2006
Posts: 492
Jeff,your package is on the way. Don't throw away the wrapping until you find the $6.00. Pat

Joined: Apr 2008
Posts: 58
N
Active Member
OP Offline
Active Member
N
Joined: Apr 2008
Posts: 58
Pat, Thank you so much. IT is great to deal with honest people such as youself. Do you happen to know where I can get a parts list/diagram of the Bennett 541? I bought mine disassembled and partially restored. I have never done a pump restoration before and am not even sure what parts are missing or how they go together.

Joined: Nov 2006
Posts: 492
Petro Enthusiast
Offline
Petro Enthusiast
Joined: Nov 2006
Posts: 492
I sorry but I have no idea. Pat

Joined: Apr 2007
Posts: 2,066
Veteran Member
Offline
Veteran Member
Joined: Apr 2007
Posts: 2,066
If you're still looking for info on the Bennet 541 check with Jack Sim. www.petrolianacollectibles.com



Joined: Apr 2008
Posts: 58
N
Active Member
OP Offline
Active Member
N
Joined: Apr 2008
Posts: 58
Still looking for the plug for the Bennett 541. Any ideas?


Moderated by  Oldgas, Ryan Underthun 

Link Copied to Clipboard

Click here for Classic Project Car auction listings

Copyright © 2023 Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.7.5