|
|
#532540
Fri May 02 2014 04:27 PM
|
Joined: Apr 2012
Posts: 128
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Apr 2012
Posts: 128 |
Having trouble getting new locks to work on my bennett 1066. I got locks from gas pump heaven but when it locks the door still has a fair bit of play (even when I use the grommet that holds latch tight to door) Any hints would help.Thanks,Tim
|
|
|
Please - NO offers to Buy or Sell in this forum category
Statements such as, "I'm thinking about selling this." are considered an offer to sell.
|
|
|
|
Joined: Oct 2000
Posts: 22,780 Likes: 1
Veteran Member
|
|
Veteran Member
Joined: Oct 2000
Posts: 22,780 Likes: 1 |
Should have bought a Mail Box Lock from HD/Lowes or your local Hardware store.
Bend the Fricken Tab.
|
|
|
|
|
Joined: Apr 2012
Posts: 128
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Apr 2012
Posts: 128 |
After having some pumps stolen in this area I want it to be as secure as possible because it is going outside. Thanks for the advice I will compare the mail box locks.
|
|
|
|
|
Joined: Oct 2000
Posts: 22,780 Likes: 1
Veteran Member
|
|
Veteran Member
Joined: Oct 2000
Posts: 22,780 Likes: 1 |
Wire pump to 240 & becomes Live when tipped/moved.
Cover inside mounting bolt w/ several inches of concrete or tack weld nuts to bolts.
Last edited by Dick Bennett; Fri May 02 2014 05:34 PM.
|
|
|
|
|
Joined: Apr 2012
Posts: 128
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Apr 2012
Posts: 128 |
LOL that would fix the neighbourhood cats too
|
|
|
|
|
Joined: Nov 2010
Posts: 351 Likes: 3
Petro Enthusiast
|
|
Petro Enthusiast
Joined: Nov 2010
Posts: 351 Likes: 3 |
LOL that would fix the neighbourhood cats too or the occasional 
|
|
|
|
|
Joined: Oct 2000
Posts: 22,780 Likes: 1
Veteran Member
|
|
Veteran Member
Joined: Oct 2000
Posts: 22,780 Likes: 1 |
Not Live all the time, just when Tipped, Mercury switch in a Pinball machine & an Alarm inside.
|
|
|
|
|
Joined: Apr 2012
Posts: 128
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Apr 2012
Posts: 128 |
Great idea! Have you tried this before!
|
|
|
|
|
Joined: Dec 2003
Posts: 795 Likes: 39
Petro Enthusiast
|
|
Petro Enthusiast
Joined: Dec 2003
Posts: 795 Likes: 39 |
Take the blade off and bend it in a vise with a hammer. Clamp the blade up so the bend will clear the cylinder. Repeat until you are happy with the closed fit of the door.
|
|
|
|
|
Joined: Apr 2012
Posts: 128
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Apr 2012
Posts: 128 |
|
|
|
|
|
|
|
