|
#311060
Sat Mar 10 2012 05:17 PM
|
Joined: May 2003
Posts: 358
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: May 2003
Posts: 358 |
Has anyone had any luck polishing out a scratch in the front of a lense. I have a very nice lense except for the scratch in the front of it. Any advise would be greatly appreciated.
Craig
Craig
|
|
|
Please - NO offers to Buy or Sell in this forum category
Statements such as, "I'm thinking about selling this." are considered an offer to sell.
|
|
|
Joined: Sep 2007
Posts: 2,737 Likes: 61
Veteran Member
|
Veteran Member
Joined: Sep 2007
Posts: 2,737 Likes: 61 |
From what I've read and heard over the few years I've been in the hobby is that minimal scratches aren't really that detrimental to the value of a lens. They are somewhat to be expected from the years these items have been around that weren't meant to be collected. If it's a super rare lens I would leave well enough alone as you start messing with glass and an "accident" could result. You might never know where a stress point might be and crack, it's done. I know I'm not answering your question but I would play on the safe side personally and leave it as is. Darin
Darin Sheffer Always looking for Mobil and Marathon items I don't already have!
|
|
|
|
Joined: Jun 2004
Posts: 2,131 Likes: 76
Veteran Member
|
Veteran Member
Joined: Jun 2004
Posts: 2,131 Likes: 76 |
I've talk to a glass man and he said they can be taken out with a polisher made of cork. The problem is that the polisher can heat the glass and if it gets too hot it will break the lens. He wouldn't touch one of mine, so it still has the scratch. Richard
|
|
|
|
Joined: May 2003
Posts: 358
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: May 2003
Posts: 358 |
Thanks guys, My feeling was to leave alone, buy if someone came back and said it was easy, I was willing to give it a try. The lense in question is a 1500 dollar lense so as much as I would like to get rid of the scratches, I think I will leave them alone.
Thanks again for your thoughts.
Craig
Craig
|
|
|
|
Joined: Dec 2008
Posts: 1,187 Likes: 13
Veteran Member
|
Veteran Member
Joined: Dec 2008
Posts: 1,187 Likes: 13 |
Craig,
Just curious ...
From what distance, one would notice the scratches? Of course once it is lit up!
|
|
|
|
Joined: Sep 2001
Posts: 505 Likes: 6
Petro Enthusiast
|
Petro Enthusiast
Joined: Sep 2001
Posts: 505 Likes: 6 |
If you take some light machine oil or WD 40 and lightly coat the insert it'll make most scratches look a lot better. Be careful though as the globe gets slippery...After time it'll come off but it does help. Scott
|
|
|
|
Joined: Jan 2012
Posts: 391 Likes: 6
Petro Enthusiast
|
Petro Enthusiast
Joined: Jan 2012
Posts: 391 Likes: 6 |
Craig, Scott is right but other than that dont worry about it too much. I found a pair of 15 inch Johnson Ethyl lenses a few years ago that had some bad scratches right on the very front of both of them. They were in the top of a barn in Marlboro, Ohio. There were mice and rats jumping out of the box when I tried to pick them up out of there. The scratches didnt affect the price of them whatsoever, they sold the next day. Good Luck! Goober
|
|
|
|
|
|