Oldgas.com Home  

Click here for Petro Porcelain Sign auction listings


Home | Help | Events | Auctions | Parts | Pictures | Links | Contact
Previous Thread
Next Thread
Print Thread
#751269 Sat Jul 04 2020 02:10 PM
Joined: May 2018
Posts: 211
Likes: 36
Petro Enthusiast
OP Offline
Petro Enthusiast
Joined: May 2018
Posts: 211
Likes: 36
I had been putting off removing this cylinder for over a year now. One of my excuses was that with the pipes still attached to the lower bowl I didn’t have a way to stand it up. I solved that by building a makeshift stand for it to be at a comfortable working height. My second excuse was this was the first cylinder I have ever removed and really didn’t want to break it! My previous visible pumps both came with broken glass cylinders already removed...I did my research before proceeding. I started with soaking the upper and lower cork gaskets with liquid wrench. There didn’t appear to be any sort of litharge glycerine cement which needed to be removed and I’m glad for that. From what I read it is a pain to scrape it out. The dome was secured by three screws rusted solid into the upper jar lid. I wrapped the cylinder with a moving blanket and carefully used a side grinder to take the heads of the screws off. The dome came off to expose the cylinder jar lid which was secured by a single centre nut. I soaked the threads in liquid wrench and gave the centre nut enough of a turn to break it free and left it at that for the day. For the next five days I gave the nut a half turn until it was loose. From what I read some guys said removing the pressure on the glass too quickly it can crack. Slow and steady sounded like the way to go. Once the centre nut was removed the jar lid still felt tight on the cylinder. The liquid wrench has soaked all the way through to the inside of the cylinder. I decided to use a rubber mallet and with minuscule taps around the outer edge of the jar lid it wiggles free. With a little push the cylinder then came free from the lower bowl. I gave the cylinder a rinse down with lukewarm soapy water and a bit of CLR to remove the staining. The cylinder is free of any cracks or chips in the glass. There is a few spots of paint I have yet to remove but I’m glad that the process went well and I’ll be able to keep the original glass with this pump when I restore it.

641EE2CC-F014-48B4-AD0A-F05903BA7416.jpeg DE7285EE-7581-4D2B-A8F1-3167639CB266.jpeg A41CFCA2-DAEE-4A99-BE02-700C188D5271.jpeg
Last edited by AlbertaNorthStar; Sat Jul 04 2020 02:12 PM.
1 member likes this: RandyM
Please use For Sale forums to sell

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
Joined: Jun 2011
Posts: 359
Likes: 3
G
Petro Enthusiast
Offline
Petro Enthusiast
G
Joined: Jun 2011
Posts: 359
Likes: 3
Nice job!

Joined: May 2012
Posts: 1,871
Likes: 48
Veteran Member
Offline
Veteran Member
Joined: May 2012
Posts: 1,871
Likes: 48
Good news on the removal. Congrats!


Have gas all the time
Joined: Apr 2003
Posts: 2,195
Likes: 74
Veteran Member
Offline
Veteran Member
Joined: Apr 2003
Posts: 2,195
Likes: 74
That is a Clearvision right not G&B ?????


Wanted early tin litho signage.
petro, farm, auto, etc.
Joined: Nov 2015
Posts: 458
Petro Enthusiast
Offline
Petro Enthusiast
Joined: Nov 2015
Posts: 458
don't look like any of my clear visions???????????? charley

Joined: May 2018
Posts: 211
Likes: 36
Petro Enthusiast
OP Offline
Petro Enthusiast
Joined: May 2018
Posts: 211
Likes: 36
The cylinder came off a Gilbert & Barker TC1-1 1386. From what I’ve heard it’s a earlier version of the T-176 the main differences are no ribs in the lower skins and a centre nut instead of cylinder rods. I found a etching on the cylinder but can only make out the back half of it. It appears to be in a bow tie style logo “—— Clear” MFG Okla. The measurements are 12.5” x 29”

5D79BD0D-5FAF-4B7E-AA92-E2D5A69029FE.jpeg
Last edited by AlbertaNorthStar; Sat Jul 04 2020 04:08 PM.
Joined: Nov 2015
Posts: 458
Petro Enthusiast
Offline
Petro Enthusiast
Joined: Nov 2015
Posts: 458
i would say that is a very rare g&b. now how about some pics of the tokheim victory .charley

Joined: Apr 2003
Posts: 2,195
Likes: 74
Veteran Member
Offline
Veteran Member
Joined: Apr 2003
Posts: 2,195
Likes: 74
G&B that I have never seen. It is a rare one


Wanted early tin litho signage.
petro, farm, auto, etc.
Joined: Apr 2012
Posts: 264
Likes: 3
Petro Enthusiast
Offline
Petro Enthusiast
Joined: Apr 2012
Posts: 264
Likes: 3
Love the remnants of the original Electro decal! Preserve it.

Joined: Jun 2013
Posts: 791
Likes: 5
M
Petro Enthusiast
Offline
Petro Enthusiast
M
Joined: Jun 2013
Posts: 791
Likes: 5
I can fill in the blanks on the glass manufacturer. The trademark is Water-Clear made by the Hyatt Glass Co., Poteau, OK. Hyatt set up in Poteau in the 1920s to make 5-gallon glass jars. They realized that they could also manufacture 5 and 10-gallon glass for visible gas pumps. They were out of business by 1932. I grew up 30 miles from Poteau and have relatives that live there. I have asked the relatives to keep their eyes open for cylinders, but no luck so far. I have Water Clear glass on my 10-gallon Wayne 519.

SAM_5565.JPG
1 member likes this: SandPCollector
Joined: May 2018
Posts: 211
Likes: 36
Petro Enthusiast
OP Offline
Petro Enthusiast
Joined: May 2018
Posts: 211
Likes: 36
Very cool! Thanks for sharing.

Joined: Apr 2021
Posts: 2
M
New Member
Offline
New Member
M
Joined: Apr 2021
Posts: 2
I just picked up a GB Tc1 myself. do you have cylinder dimensions for this pump? Also is that dome top the same dimensions as a clear vision ?
Cheers

Joined: Apr 2021
Posts: 2
M
New Member
Offline
New Member
M
Joined: Apr 2021
Posts: 2
is that jar lid shared with any other pumps or exclusive to the tc1 Also do you have any other shots of the base
thanks


Moderated by  Oldgas, Ryan Underthun 

Link Copied to Clipboard

Click here for Gas Pump auction listings

Copyright © 2023 Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.7.5