Oldgas.com Home  
Home | Help | Events | Auctions | Parts | Pictures | Contact
Previous Thread
Next Thread
Print Thread
Gas Pump Recycling No Brainer
#693904 Wed Sep 06 2017 07:47 AM
Joined: Feb 2001
Posts: 829
L
Petro Enthusiast
OP Offline
Petro Enthusiast
L
Joined: Feb 2001
Posts: 829
Always used new hardware and flange nuts for expedient assembly of my pump restorations but couldn't bring myself to toss a 80 year old large bolt and heavy oversized nut. Ended up with a bunch of large plastic nut containers full of brass machine screws, 5/16 up bolts and nuts, and miscellaneous do das left over from 20 years of doing gas pumps.

Don't have a media tumbler and sold my cabinet blaster so I used the common household method:
couple gals of white vinegar
Simple Green
Kroil Gal
Optional Gibbs oil

Fill each tub with straight vinegar and soaked for couple days.
Poured off vinegar and flushed each tub with scalding water and Simple Green
Poured off water and dumped content into an old towel and shake to dry
Dried out plastic tubs, returned contents and added about two ounces of Kroil and shake, coating the bolts. Let set for 24 hrs. and again dump on same towel to wipe excess and return to tubs. Optional: spray gibbs oil on them .

Process will remove rust and leave hardware with darker clean oil finish.
Vinegar will turn brass the darker red color so be advised.

Nice to use on early stuff where the nuts and bolts show or the internal mech is displayed. All probably knew this but made me happier to not throw them away.
And I hate punching them through cardboard so my blaster will clean them.


larry ivy
Please use For Sale forums to sell

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
Re: Gas Pump Recycling No Brainer
LarryIvy #693925 Wed Sep 06 2017 06:07 PM
Joined: May 2016
Posts: 480
Likes: 23
Petro Enthusiast
Offline
Petro Enthusiast
Joined: May 2016
Posts: 480
Likes: 23
Good tip Larry. I'm trying to re-use as much original hardware as possible on my two pumps so this will come in handy, thanks.

BrianH


Brian H
Re: Gas Pump Recycling No Brainer
BrianH #693942 Thu Sep 07 2017 05:58 AM
Joined: May 2017
Posts: 28
L
ldj Offline
Active Member
Offline
Active Member
L
Joined: May 2017
Posts: 28
I don't have a tumbler either so I put nuts,bolts,etc in a coffee can, tape it up real good, then wrap the can on an old bluejeans leg and then put it in the cloths dryer with some dirty cloths and let her tumble.


Moderated by  Oldgas, Ryan Underthun, Watchdog9 

Link Copied to Clipboard

Click for an eBay Search Form and lots more live petro auction listings

Copyright © 2020Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.7.4