Oldgas.com Home
Posted By: 983jeremy Wayne 40a veeder root - Sun Aug 19 2012 11:47 PM
I am looking for the veeder root meter for this pump. Any help would be great .
Thanks
Posted By: Newpumpguy71 Re: Wayne 40a veeder root - Sun Aug 19 2012 11:49 PM
Any chance you have a spare bezel for this pump?
Posted By: hancock-oil Re: Wayne 40a veeder root - Sun Aug 19 2012 11:51 PM
Check ebay one's on there now!!! Jim
Posted By: Newpumpguy71 Re: Wayne 40a veeder root - Mon Aug 20 2012 12:34 AM
Actually I need the cast bezel that the glass is mounted to.
Posted By: oldnfuelish Re: Wayne 40a veeder root - Mon Aug 20 2012 12:38 AM
40 a takes an eight inch veeder root.that and window bezels are tough to find. Ron Scobie shows them on his website( reproduction) but last time I talked to him,he was out. Maybe give him a call

http://www.gaspump.com/Ron_Scobie_Enterprises_Hom.html
Posted By: 983jeremy Re: Wayne 40a veeder root - Mon Aug 20 2012 02:36 AM
No spare bezels, sorry, I saw the one listed on eBay it may be an option, to bad I already had the one that I got with the pump rebuilt.
Posted By: Notchcad Re: Wayne 40a veeder root - Mon Aug 20 2012 02:42 AM
8 inchers are a tough find!
Posted By: 983jeremy Re: Wayne 40a veeder root - Tue Aug 28 2012 03:18 AM
Bump.
Posted By: 983jeremy Re: Wayne 40a veeder root - Thu Oct 18 2012 04:00 AM
Still looking!
Posted By: tulareone Re: Wayne 40a veeder root - Thu Oct 18 2012 04:21 AM
hate to say it but one of the venders at our show had one bought by another collector he's been searching for a long time also--
Posted By: Tbirdgas Re: Wayne 40a veeder root - Fri Oct 19 2012 09:42 PM
Ruben,remember how much it went for??
Posted By: gasgeezer Re: Wayne 40a veeder root - Fri Oct 19 2012 10:34 PM
Ive got a smaller vroot in a Tokheim 36 parts pump. Not sure it will fit a 40???
Posted By: Dick Bennett Re: Wayne 40a veeder root - Fri Oct 19 2012 11:34 PM
Wayne 40/40A need a 8", Tok 36 is a 10" & Tok 36B, Wayne 60/70's are 12".

Les, PM sent
Posted By: 983jeremy Re: Wayne 40a veeder root - Fri Oct 26 2012 04:41 AM
Thanks dick. One day I will find one I hope!
Posted By: Terry Flannery Re: Wayne 40a veeder root - Fri Oct 26 2012 12:16 PM
Enlighten me on measuring them,vertical,horizontal ???I just bought about 8 V/R assy's and some are what I call 2-3 bottom wheel. It's a mixture even a couple meters for delivery trucks.Mostly decent meters but have no knowledge of their function or condition other than they all look very good.
Posted By: 983jeremy Re: Wayne 40a veeder root - Sat Oct 27 2012 02:43 PM
From what I know they are 8" from the face mounting bracket to face mounting bracket. It has only six wheels with no price wheels, and easiest was is the drum has a cut out in it. Looks like this.
Posted By: MATT ALVAREZ Re: Wayne 40a veeder root - Sat Oct 27 2012 04:11 PM
Some eight inch computers have price wheels. I you find one do not let that stop you. The six wheel faces will still screw on and cover the price wheels or you could remove the price wheels. I have a Tok 34 that was original unrestored with six wheel faces. When I took them off there were price wheels behind them.
Posted By: Dick Bennett Re: Wayne 40a veeder root - Sat Oct 27 2012 08:12 PM
Measure from where Face Mounts to Face Mounts.
They were made w/ 6 wheels & 9 wheels per side.
Posted By: dodgeman60 Re: Wayne 40a veeder root - Sat Oct 27 2012 08:43 PM
here is a picture of what we have, if this helps you out let me know. maybe db can recognize some of them and tell what there from.if i can help let me know. all of these will be for sale.

Attached picture phpdOHKHSPM.jpg
Attached picture phpaU7vALPM.jpg
Posted By: Dick Bennett Re: Wayne 40a veeder root - Sat Oct 27 2012 09:27 PM
Looks like a Bunch of Late 70's-80's to me w/ solid cast sides. Some have Remote re-sets.
Posted By: Dick Bennett Re: Wayne 40a veeder root - Sat Oct 27 2012 09:32 PM
Look at these on Jack Sim's web site;
http://petrolianacollectibles.com/veeder-root.htm
NOTE the SIDE FRAMES in 1st pic.
Posted By: dodgeman60 Re: Wayne 40a veeder root - Sat Oct 27 2012 09:44 PM
there is more 3 wheeled computers than 4 wheeled if that makes a difference
Posted By: Dick Bennett Re: Wayne 40a veeder root - Sat Oct 27 2012 10:22 PM
Did you even look at the link?
Posted By: dodgeman60 Re: Wayne 40a veeder root - Sun Oct 28 2012 09:59 AM
whoops, seen it now, thanks.
Posted By: Dave's Garage Re: Wayne 40a veeder root - Mon Oct 29 2012 05:28 AM
8" computer

Attached picture W40 8 Computer-1.jpg
Posted By: Terry Flannery Re: Wayne 40a veeder root - Tue Oct 30 2012 08:29 PM
Had a chance to check our VR's today. They look like the 56A model from above link and have been reconditioned and maybe one or two hasen't. They all measured 8 inches across the front on mounting brackets and 12 inches on the sides. There is a tall Tok 39 there and is same as in it.
So kind of looks like a match for lots of pumps. Only one VR is 4 wheel on top row. Make offers and would like to sell all at once, 5 V/R's and 2 Neptune Auto Stop model432 truck dely meters. We're in NE Wis and snow is in the forecast, they are inside out of the weather.
© Primarily Petroliana Shop Talk