Oldgas.com Home
Posted By: Corey1955 Rapid Dayton 4200 Help - Sat Aug 07 2021 12:07 PM
I might be purchasing this pump for a light restoration its all there does anyone have a picture with the doors off or can guide me on how to open this puppy up. I see the hand guide at the base but I don’t know if the doors are hinged or slide? It’s been outside for some time and I don’t want to confuse age and possibly rust keeping it closed versus me trying to open it the wrong way and break something. I know there is like 0 parts for these. Just gonna clean it up and light it up. Any help would be appreciated.
Thanks

Attached picture 83CE7E29-0AB5-406E-9DB7-F9C18C7BB67F.jpeg
Posted By: Hardy's Garage Re: Rapid Dayton 4200 Help - Sun Aug 08 2021 12:21 AM
The opening at the base serves as a vent only. There should be an access door on the same side as the computor reset handle. Open up the access door, which is just below the computor rest handle, and there are two levers inside, one for each door. The doors are hinged. You may have to drill out the lock out of the access door but it is a simple cabinet lock available at any hardware store. If you still have trouble let me know and I can take a picyure of my pump with the door open.
Posted By: Corey1955 Re: Rapid Dayton 4200 Help - Sun Aug 08 2021 01:34 AM
So kinda like the door lock levers on my tall Tokheim 39. Thank you so much for that answer if you do get a chance to take some pictures that would really help but this is a start.
Posted By: Hardy's Garage Re: Rapid Dayton 4200 Help - Sun Aug 08 2021 02:15 PM
Pretty much like the 39!
© Primarily Petroliana Shop Talk