Oldgas.com Home
Posted By: John85hikes Did I get it right? Sinclair sign - Wed May 06 2020 07:04 PM
I got this sign off ebay just looking to be schooled did lots of reading before purchase so now for seller info.

The ebay seller did not have a lot of auto signs check. Seller did have other signs not related to the automotive industry that have no reproduction value. Seller did have other old stuff for sell not all junk. So I think seller is legit

Now my thinking on the sign I looked at known originals and fakes. I came to the conclusion that the real ones are a lighter shade of green and just look more clean so to speak in the letters. My thinking on the backside of the sign with the imperfections in green equals handmade the guy who made got some by mistake no one would see it and sent it down the line? what do you guys think?

Attached picture 20200430_105106.jpg
Attached picture 20200430_105150.jpg
Posted By: petropumps Re: Did I get it right? Sinclair sign - Wed May 06 2020 07:11 PM
Paint on the back is from when they repainted the pump at the station. It’s legit.
Posted By: Speedracer Re: Did I get it right? Sinclair sign - Wed May 06 2020 11:11 PM
The ‘r’ in Sinclair is correct. Your sign is good.

However, you got lucky for an eBay pump plate purchase. Be careful in the future, most of them are fake. Ask someone next time, BEFORE buying.

-Steve
Posted By: keithia Re: Did I get it right? Sinclair sign - Thu May 07 2020 02:47 AM
Good sign!
Posted By: Steven C. Re: Did I get it right? Sinclair sign - Thu May 07 2020 09:05 AM
Your good!!
Real on the left
Fake on the right

Attached picture 1.jpg
Attached picture 4.jpg
Posted By: Rocadog Re: Did I get it right? Sinclair sign - Thu May 07 2020 05:05 PM
Reproductions are getting better. Here is a sign currently on Ebay that is being sold as reproduction and the cursive lettering on the R in Sinclair looks the same as shown in the above picture from a real sign. Green color is darker than an original though...

Attached picture 7C45D9A6-67B2-417F-9EF7-2A01A11089C6.jpeg
Posted By: wayno48 Re: Did I get it right? Sinclair sign - Thu May 07 2020 05:45 PM
because they are being told what to correct here and on sites like this
Posted By: desertexplorer Re: Did I get it right? Sinclair sign - Thu May 07 2020 07:06 PM
If you look at these Sinclair pump plates long enough you’ll see the difference pretty quick. If you run a straight edge along the trailing edge of the “r” it is lower then the middle. An original vintage sign will have a drop to the trailing end of the “r”. All the repros I’ve seen do not have this slight dip in the end of the “r”. You did good! Here is an original:

Attached picture D352DF5C-946F-4A2C-B4F5-D52C808903F4.jpeg
Posted By: Speedracer Re: Did I get it right? Sinclair sign - Thu May 07 2020 07:42 PM
Originally Posted by wayno48
because they are being told what to correct here and on sites like this
You are correct. That's why I didn't get too specific.
Posted By: John85hikes Re: Did I get it right? Sinclair sign - Mon May 18 2020 05:41 PM
Thanks I do understand about to much info being out there and people making better fakes. While also at the same time teaching the younger folks how to spot the real ones so they live on past us. I got some new finds and my yamahopper is alive 🛵

Attached picture 20200518_101742.jpg
Attached picture 20200518_101823.jpg
Attached picture 20200518_101915.jpg
© Primarily Petroliana Shop Talk