I purchased an 850 and the serial no. ID tag was missing. According to the Repair Parts Manual, there were 2 nozzles, the roller nozzle, which I can't afford, and a second type of nozzle, part no. 4711. I purchased an OPW 400 and the nozzle body and nozzle end are too long. The entire nozzle unit does not fit when hooked over the on/off handle. What nozzle brand and model number will properly fit an 850?
Joe

For some reason very few people know I have a section on my website that identifies what nozzle was on a pump when it was delivered.

If you click on this address: www.petrocollect.com you will get to my site.

Go down to the bottom and click on "Please click here..."

You will now find a list of all the things I have on my site, there are over 27,000 images on the site.

Click on "Nozzles"

Click on "Tokheim"

Go down the list to "850 Late....," this is the nozzle you are looking for.

The parts manual you have is for the early version of the 850, the one with the chain drive.

Here is the address for the literature I have for both the early and the late 850: http://petrolianacollectibles.com/tokheim%20850.htm

Jack Sim

Thank you Jack. I sent you two emails requesting copies of late 850 literature and you never responded. I gave up after two tries.